自动上料搅拌机是组成混凝土搅拌站制备混凝土流程中关键机器，若要更换水泥搅拌机的搅拌叶，在拆卸搅拌机时要注意部件的拆卸顺序以及位置，在完成水泥搅拌机叶片的更换后把部件归位。

　　The automatic feeding mixer is a key machine in the process of preparing concrete in the concrete mixing station. If the mixing blades of the cement mixer need to be replaced, attention should be paid to the disassembly sequence and position of the components when the mixer is disassembled, and the parts shall be put back after the replacement of the blades of the cement mixer.

　　自动上料搅拌机中搅拌叶安装注意事项？

　　Precautions for installation of mixing blade in automatic feeding mixer?

　　1.搅拌机的搅拌叶的倾角要一致，不能装反；

　　1. The inclination angle of the mixing blade of the mixer should be consistent, and it should not be installed in reverse;

　　2.搅拌叶倾角过大或过小都会影响搅拌产量，所以叶片与搅拌轴线的倾角在70度或80度左右即可；

　　2. Too large or too small inclination angle of the mixing blade will affect the mixing output, so the inclination angle between the blade and the mixing axis is about 70 or 80 degrees;
                 

　　3.搅拌叶的最佳角度是旋转至上部露出泥料20-30mm；

　　3. The best angle of the mixing blade is to rotate to the upper part and expose the mud 20-30mm;

　　4.两根轴上搅拌叶的相位应与漆相对会在时的相位错开90度；

　　4. The phase of mixing blades on the two shafts should be staggered by 90 degrees from the phase when the paint is opposite to each other;

　　5.安装搅拌叶时一定要上紧，应尽量上紧搅拌叶上的头一个螺母。

　　5. When installing the mixing blade, be sure to tighten the first nut on the mixing blade as much as possible.

　　搅拌机叶片直接与砂石接触，损耗速度快，要按照搅拌站设备管理制度把机器的检修工作落实到位，为搅拌站创造稳定的工作环境。

　　The blades of the mixer are in direct contact with sand and gravel, and the loss rate is fast. According to the equipment management system of the mixing plant, the maintenance work of the machine should be carried out in place to create a stable working environment for the mixing station.

　　以上自动上料搅拌机中搅拌叶安装注意事项的相关介绍，希望能够帮到大家，想要了解更多内容欢迎点击我们的http://www.zkhntjbj.com网站。

　　The above automatic feeding mixer mixing blade installation precautions related to the introduction, hope to help you, want to learn more, welcome to click our http://www.zkhntjbj.com Website.