What are the cleaning methods of cement mixer sludge?

水泥搅拌机产生油泥，是否有办法解决呢？小编就给大家带来水泥搅拌机油泥的清理方法。

Is there any way to solve the sludge produced by cement mixer? Xiaobian to bring you cement mixer sludge cleaning methods.

所谓，知己知彼百战不殆。首先我们要先知道水泥搅拌机油泥的构成，油泥是长期使用矿物油残留的东西，发动机里如果加了机油添加剂，那么就更容易积油垢。那么知道了它是矿物油的残留，我们根据相似相溶的原理，找干净的油进行清洗。我们身边的油，无非柴油和汽油。那么它产生油泥无非本体就是柴油和汽油。我们先用柴油进行浸泡处理，再用汽油进行刷洗处理就可以使得发动机的油泥消失殆尽。对于机油泵，须要仔细清洗，他是油泥集中存在的地方，拆洗过后的垫子不能再用，防止对机油泵造成污染。

As the saying goes, know yourself and know your enemy, and you will be invincible in a hundred battles. First of all, we need to know the composition of cement mixer sludge. Sludge is the residue of mineral oil used for a long time. If the engine oil additive is added to the engine, it is easier to accumulate oil dirt. So we know that it is a residual mineral oil, we find clean oil for cleaning according to the principle of similar phase dissolution. All the oil around us is diesel and gasoline. Then it produces sludge is nothing more than diesel and gasoline. We first use diesel oil for soaking treatment, and then use gasoline for brushing treatment, which can make the engine sludge disappear. For the oil pump, it is necessary to clean it carefully. It is the place where the oil sludge is concentrated. The cushion removed and cleaned can not be used again to prevent the oil pump from being polluted.
                

有人会问小编，你这些都是拆机进行清洗，很麻烦而且成本很高，有没有不拆机的清洗成本低一点的。那么，下面小编就告诉你这种清洗方法。

Some people will ask Xiaobian, these are all machine dismantling for cleaning, which is very troublesome and expensive. Is there any cleaning cost lower without dismantling the machine. Well, the following small series will tell you this cleaning method.

一般不拆发动机有两种简单清洗方法，一种添是加在机油里的清洗油，还有一种是用机器接在发动机上，用一种清洗剂循环冲洗。但是这两种清洗只适合不太严重的油泥的堆积，对于严重的油泥堆积这样的方法并不有效。

Generally, there are two simple cleaning methods without dismantling the engine. One is to add the cleaning oil added to the engine oil, and the other is to connect the machine to the engine and wash it with a cleaning agent. However, these two cleaning methods are only suitable for the less serious sludge accumulation, which is not effective for the serious sludge accumulation.

那么有人会问小编，如何判断油泥的积累程度？别急，一步步来，这就是下面要讲的问题。

Then someone will ask Xiaobian, how to judge the accumulation of sludge? Don't worry. Step by step, that's what we're going to talk about.

如果你的混凝土搅拌机油耗和噪音明显增加，那么你的车油泥积累肯定很厚。那么二种的操作明显不行，在采取了一种方法后没有好转。我们就需要采用这种方法。小型混凝土搅拌机发动机里的油泥想清洗，须要把发动机解体，用超声波机才清洗的干净。装才能保证混凝土搅拌机的机器油泥达到标准。

If the fuel consumption and noise of your concrete mixer increase significantly, the sludge accumulation of your truck must be very thick. Then the two operations are obviously not good, and they are not improved after one method is adopted. We need to take this approach. If you want to clean the sludge in the engine of small concrete mixer, you need to disassemble the engine and clean it with ultrasonic machine. In order to ensure that the machine sludge of the concrete mixer reaches the standard.