混凝土搅拌机作为建筑工程类车辆，俭省油耗更为重要，那怎样做才能降低自上料搅拌机的油耗呢？一同来理解俭省油耗的诀窍：

　　Concrete mixer as a construction vehicle, saving fuel consumption is more important, so how to reduce the fuel consumption of self loading mixer? Let's understand the tips of saving fuel consumption:

　　1. 在行驶过程中假如发现搅拌机的滑行间隔明显减少，这是司机们应该检查一下搅拌机的轮胎气压能否符合气压规范。若轮调充气缺乏，油耗量也会增加。所以我们应该适时的为轮胎充气。检查轮胎的磨损水平，假如轮胎磨损严重时，就会经常呈现打滑现象，耗油量就会增加。所以在必要时可改换新的轮胎。

　　1. In the process of driving, if it is found that the sliding interval of the mixer is significantly reduced, the drivers should check whether the tire pressure of the mixer can meet the pressure specification. The fuel consumption will also increase if there is a lack of air in the wheel. So we should inflate the tires at the right time. Check the wear level of the tire. If the tire is seriously worn, it will often slip, and the fuel consumption will increase. Therefore, new tires can be replaced if necessary.

　　2. 在自动上料搅拌机行驶中或启动时发现车轮有异常响声，车友们应该及时检查轴承及刹车系统能否有毛病。假如车轮转动不正常，就会影响搅拌机的车速，使得油耗加大。这时就应该检修轴承及刹车系统。搅拌机离合器打滑会使发起机的转数丧失。当您在急加速时发现搅拌机发起机转速表增加很快，但车速增加却很慢，这时能够断定是离合器打滑了。这时需求改换离合器片，离合器压盘和驱轮。

　　2. If the wheels make abnormal noises when the automatic feeding mixer is running or starting, the riders should check the bearing and brake system in time. If the wheel rotation is not normal, it will affect the speed of the mixer and increase the fuel consumption. At this time, the bearing and brake system should be overhauled. The slippage of the mixer clutch will cause the loss of the revolution of the starter. When you are accelerating rapidly, you find that the speedometer of mixer starter increases rapidly, but the speed increases slowly. At this time, you can conclude that the clutch is slipping. At this time, it is necessary to change the clutch plate, clutch pressure plate and driving wheel.

　　3. 当搅拌机曾经行驶二三十万公里时，通常会呈现气缸压力缺乏的现象，这时油耗会明显增加。假如车辆真呈现这种状况，那么搅拌机的发起机就需求大修了。当排气管呈现冒黑烟、油耗加大时，需求检查化油器。假如化油器太脏能够用清洗剂直接向化油口进气口喷一喷，若此时还冒黑烟，那只能把化油器拆开清洗了。

　　3. When the blender has been driven for two or three hundred thousand kilometers, there is usually a lack of cylinder pressure, and the fuel consumption will increase significantly. If the vehicle really presents this kind of condition, then the mixer's engine needs to be overhauled. When the exhaust pipe shows black smoke and the fuel consumption increases, it is necessary to check the carburetor. If the carburetor is too dirty, it can be sprayed directly to the oil inlet with cleaning agent. If there is still black smoke at this time, the carburetor can only be disassembled for cleaning.
               

　　4. 假如自动上料搅拌机火花塞运用的时间太长，也会呈现油耗加大的现象，由于搅拌机火花塞损坏会使点火的能量降落，车提速减慢，招致油耗量明显增加。

　　 4.If the spark plug on the mixer is used too long, the fuel consumption will increase obviously.

　　5. 当搅拌机的温控开关和节温器损坏时，会呈现油耗增加的现象。因而搅拌机的温控开关和节温器损坏会使水温降低，化油器不能正常工作，招致搅拌机油雾化不良，油耗明显增加。所以要定期检查温控开关和节温器。水泥搅拌机价钱也不是太高，假如活儿比拟多，一两年就能回本，但是这些小细节还是要留意，才能取得更大的收益。

　　5. When the temperature control switch and thermostat of the mixer are damaged, the fuel consumption will increase. Therefore, the damage of the temperature control switch and thermostat of the mixer will reduce the water temperature, and the carburetor will not work normally, resulting in poor atomization of the mixing oil and obvious increase of fuel consumption. So check the temperature control switch and thermostat regularly. The price of cement mixer is not too high. If there is more work, the cost can be recovered in one or two years. However, we should pay attention to these small details to get more profits.

　　以上是关于自动上料搅拌机节省油耗的窍门，你学会了吗，如想了解更多精彩内容请点击官方网站:http://www.zkhntjbj.com

　　The above is about the tips of automatic feeding mixer to save fuel consumption. Have you learned it? For more information, please click the official website: http://www.zkhntjbj.com