Concrete feeding mixer is more and more common, more and more people use concrete feeding mixer. However, many people don't know how to use the concrete mixer.

在使用混凝土搅拌机之前，检查控制器是否完好。停机后，将水和石块倒入搅拌桶10至15分钟进行清洗，然后将水和石块清除。当操作人员需要进入搅拌筒进行清洗时，除切断电源、卸下保险丝外，还需要锁好开关箱。

Before using the concrete mixer, check whether the controller is in good condition. After shutdown, pour the water and stones into the mixing bucket for 10 to 15 minutes for cleaning, and then remove the water and stones. When the operator needs to enter the mixing drum for cleaning, in addition to cutting off the power supply and removing the fuse, he also needs to lock the switch box.
               

混凝土搅拌机应定期维护保养，如清洗、润滑、加油等。

The concrete mixer should be maintained regularly, such as cleaning, lubrication, refueling, etc.

我们要记住，不能用锤击的方法消除混凝土搅拌筒内堆积的混凝土。我们只能用凿子把它凿掉。

We should bear in mind that hammering can not be used to eliminate the accumulation of concrete in the concrete mixing drum. We can only chisel it out.

冬季使用时，应注意在工作结束后用水清洗混凝土搅拌机的转鼓，并将泵、水箱和水管内的积水排干，以免泵、水箱和水管冻伤。

When using in winter, the drum of concrete mixer should be cleaned with water after work, and the accumulated water in pump, water tank and water pipe should be drained to avoid frostbite of pump, water tank and water pipe.

以上内容就是混凝土搅拌机厂家带来的讲解，希望能给你带来帮助，如有需要，欢迎随时来电咨询。

The above content is the explanation brought by the concrete mixer manufacturer. I hope it can help you. If necessary, please call at any time.