搅拌机厂家的保养注意事项!
来源:http://www.zkhntjbj.com/日期:2021-05-13
概述:1 搅拌桶:在使用的前50个小时内,检查罐子和其他零件的螺钉是否移动。清洁内部油脂并添加润滑油。1 Mixing barrel: check whether t
1.搅拌桶:在使用的前50个小时内,检查罐子和其他零件的螺钉是否移动。清洁内部油脂并添加润滑油。
1. Mixing barrel: check whether the screw of jar and other parts moves within 50 hours before use. Clean the internal grease and add lubricating oil.
2.液压驱动系统:液压系统每次均应使搅拌器正常运行,以确保搅拌轮正常运行。同时,不能保证其清洁度,不能压缩灰分之类的压缩系统,并且该系统不能正常运行或损坏。
2. Hydraulic drive system: the hydraulic system should make the agitator run normally every time to ensure the normal operation of the mixing wheel. At the same time, it can't guarantee its cleanliness, it can't compress the compression system such as ash, and the system can't operate normally or be damaged.
3.供水系统:液压供水系统尽量位于水箱的四分之一处,并始终检查阀是否密封或是否正常运行。防止管道结冰的水。
3. Water supply system: the hydraulic water supply system should be located at the quarter of the water tank as far as possible, and always check whether the valve is sealed or normal operation. Water to prevent pipes from freezing.
除了上述识别之外,还需要定期检查混合车系统,以维修旋入式密封车以进行维护。摩擦性能影响车辆的性能。
In addition to the above identification, regular inspection of the hybrid system is required to repair the screw in seal car for maintenance. Friction performance affects the performance of vehicle.
This article is provided by the automatic feeding mixer. Thank you for your reading. I hope the above contents can help you. If you want to know more wonderful contents, please click our official website: http://www.zkhntjbj.com .