一台机器解决了多种问题，装载机、搅拌机、运输车三者合一，可搅拌各种塑性、干硬性、流动性混凝土，实现了从上料、注水、搅拌、卸料的全过程自动化。
One machine solves a variety of problems. Loader, mixer and transport vehicle are integrated. It can mix all kinds of plastic, hard and flowing concrete, and realize the automation of the whole process from loading, water injection, mixing and unloading.
1、熟知搅拌机安全操作规程，由操作工配合对设备的检修和保养。 2、熟悉计量操作盘、搅拌机操作盘、骨料水泥操作盘功能，各功能键、仪表、警示灯相对应的机械机构、执行电器及其执行顺序。 3、熟知搅拌动力盘、辅机机动力盘
1. Be familiar with the safe operation procedures of the mixer, and the operator shall cooperate in the overhaul and maintenance of the equipment. 2. Be familiar with the functions of metering operation panel, mixer operation panel and aggregate cement operation panel, as well as the corresponding mechanical mechanism, actuator and execution sequence of each function key, instrument and warning light. 3. Familiar with mixing power plate and auxiliary power plate

使用混凝土搅拌机作业场地应有良好的排水条件，机械近旁应有水源，机棚内应有良好的通风、采光及防雨、防冻设施，并不得有积水。
The operation site where the concrete mixer is used shall have good drainage conditions, there shall be water source near the machinery, and there shall be good ventilation, daylighting, rainproof and antifreeze facilities in the machine shed without ponding.
当气温降到5℃以下时，管道、水泵、机内均应采取防冻保温措施。
When the temperature drops below 5 ℃, anti freezing and thermal insulation measures shall be taken in the pipeline, water pump and machine.
作业后，应及时将机内、水箱内、管道内的存料、积水放尽，并应清洁保养机械，清理工作场地，切断电源．锁好开关箱。
After operation, the stored materials and accumulated water in the machine, water tank and pipeline shall be drained in time, the machinery shall be cleaned and maintained, the work site shall be cleaned, the power supply shall be cut off and the switch box shall be locked.
固定式搅拌机应安装在牢固的台座上。当长期固定时，应埋置地脚螺栓；在短期使用时，应在机座上铺设木枕并找平放稳。
The fixed mixer shall be installed on a firm pedestal. When fixed for a long time, anchor bolts shall be embedded; During short-term use, wooden pillows shall be paved on the base, leveled and placed stably.
应使操作人员能看到各部工作情况。电动搅拌机的操纵台，应垫上橡胶板或干燥木板。
The operator shall be able to see the work of each department. The console of the electric mixer shall be padded with rubber plate or dry wood plate.
混凝土搅拌机的停放位置应选择平整坚实的场地，周围应有良好的排水沟渠。就位后，应放下支腿将机架顶起达到水平位置，使轮胎离地。当使用期较长时，应将轮胎卸下妥善保管，轮轴端部用油布包扎好，并用枕木将机架垫起支牢。
The concrete mixer shall be parked on a flat and solid site with good drainage ditches around. After in place, put down the outrigger and Jack the frame to a horizontal position to lift the tire off the ground. When the service life is long, the tire shall be removed and kept properly, the end of the axle shall be wrapped with tarpaulin, and the frame shall be padded and firmly supported with sleepers.