搅拌一体车的转速出现大的差异什么原因?
来源:http://www.zkhntjbj.com/日期:2022-04-29
搅拌一体车的工艺会对它的转速产生比较大的影响,但很多时候作为操作人员会忽略掉这一点,那么搅拌一体车的转速出现大的差异什么原因?
Mixing vehicle process will have a large impact on its speed, but many times as an operator will ignore this point, so what is the reason for the large difference in the speed of the mixing vehicle?
搅拌一体车内有刮刀是一种无死点混合设备,行星架上的活动刮刀和搅拌桨底部的刮刀在搅拌时不断的将搅拌机内壁和底部的物料刮掉,从而保证物料的充分混合;传动部件的机械密封及上下罐体间的软密封使物料可在真空条件下混合,保证物料不致发泡及清除物料中的空气成分。
The scraper inside the mixing body is a kind of non-dead point mixing equipment. The scraper on the planet rack and the scraper at the bottom of the stirring paddle are constantly scraping off the inner wall of the mixer and the material at the bottom when stirring, so as to ensure the full mixing of materials; The mechanical seal of the transmission parts and the soft seal between the upper and lower tank make the material mix under vacuum condition, to ensure that the material will not foam and remove the air component in the material.
罐体内壁经精车加工,确保刮刀可把罐体内壁上的物料完全刮掉;罐体有加热和冷却两种方式。加热罐体可通过电加热、蒸汽加热及油水循环加热,客户可根据需要选择。釜体上装有温控装置,确保物料温度无误差;采用液压上升下降。
The inner wall of the tank is processed by fine car to ensure that the scraper can completely scrape off the material on the inner wall of the tank; There are two ways of heating and cooling the tank. The heating tank can be heated by electric heating, steam heating and oil-water circulation heating, customers can choose according to their needs. The kettle body is equipped with temperature control device to ensure that the material temperature without error; Hydraulic ascending and descending.
低速搅拌部件采用行星齿轮传动,搅拌桨在公转时也自转,使物料上下及四周运动,从而在较短的时间内达到理想的混合效果。高速分散部件与行星架一起公转,同时高速自转,使物料受到强烈的剪切与分散混合,其效果为普通混合机的几倍。
The low-speed stirring part adopts planetary gear transmission, and the stirring paddle rotates when it is in revolution, so that the material moves up and down and around, so that the ideal mixing effect can be achieved in a short time. The high-speed dispersing parts and the planetary frame revolve together, and rotate at high speed at the same time, so that the material is subjected to strong shearing and dispersing mixing, the effect is several times that of the ordinary mixer.
分散
搅拌一体车的部件分单分散轴和双分散轴,客户可根据需要选用;釜内低速搅拌桨与高速分散头的转速均采用变频调速,可根据不用工艺不同粘度选择不同的转速。大家在选择的时候根据自己的实际需求去进行选择。
The parts of the dispersed mixing vehicle are divided into single dispersed shaft and double dispersed shaft, which can be selected according to the needs of customers; The speed of low speed stirring impeller and high speed dispersing head in the kettle adopts frequency conversion speed regulation, and different speed can be selected according to different viscosity of different processes. Everyone chooses according to their actual needs.
When we use different mixing vehicle will find that its speed is a certain difference, so to recognize this aspect of the line, more content to the website www.zkhntjbj.com for consultation.