自动上料搅拌机在一些建筑施工过程中是比较常见的一种机械车辆设备，通过在我们操作设备的过程中有一些需要注意的事项。那么今天就让我们共同来了解一下自动上料搅拌机在卸料过程中的注意事项吧。

The automatic feeding mixer is a kind of mechanical vehicle equipment that is common in some construction processes. There are some matters needing attention in the process of operating the equipment. Today, let's take a look at the precautions of the automatic feeding mixer in the unloading process.

1、卸料前让搅拌罐全速运转一两分钟，让混凝土充分搅拌，必要时可以加一些水，让混凝土搅拌得更均匀，也方便卸料。

1. Before unloading, let the mixing tank run at full speed for a minute or two to fully mix the concrete. If necessary, add some water to make the concrete mix more evenly and facilitate unloading.

2、放料时把车尽量停在平地上放料前先把出料斗溜槽打湿，方便清洗。

2. When discharging, park the truck on the flat ground as much as possible and wet the chute of the discharge hopper before discharging to facilitate cleaning.

3、放料时好自己看着，免得放料工乱操作放料操作杆，每次罐子正反转中间位子时好停一下，保护减速机，托轮等。

3. Keep an eye on yourself when discharging, so as to prevent the discharging operator from operating the discharging lever at random. Stop every time when the tank is in the middle of the forward and reverse direction, and protect the reducer, supporting wheel, etc.

4、洗罐子时一定要仔细的冲洗干净，并把水反复的正反转两次，再放出来，后一趟时把水箱的水全部放进罐子，再回到站加水清洗罐子。

4. When washing the tank, be sure to wash it carefully, and repeat the positive and negative rotation of the water twice, and then release it. In the next trip, put all the water in the tank into the tank, and then return to the station to add water to clean the tank.

在我们操作使用自动上料搅拌机设备的过程中，为了能够保证设备的良好操作性能，希望大家一定要对这些该注意的事项有所了解才行，避免在操作过程中因对设备不了解而出现操作失误，影响正常的施工流程进度。关注我们http://www.zkhntjbj.com，了解更多相关内容！

In the process of using the automatic feeding mixer, in order to ensure the good operation performance of the equipment, we hope that you must understand these precautions, so as to avoid operating errors due to ignorance of the equipment during the operation, which will affect the normal construction process. Follow us http://www.zkhntjbj.com , learn more about it!