搅拌机的出料系数指的什么？出料系数是混凝土搅拌机搅拌后，出来的混凝土和原来投料体积之比，算出料量是系数乘以搅拌机的装料容量。下面混凝土搅拌机厂家为您讲解更为详细的内容。

What is the discharge coefficient of the mixer? The discharge coefficient is the ratio of the concrete mixed by the mixer to the original feeding volume. The calculated discharge volume is the coefficient multiplied by the charging capacity of the mixer. The manufacturer of concrete mixer will explain the content in more detail.

搅拌机的工作时间可分为：装料时间，即从加料开始到搅拌筒，到装料过程结束；出料时间，从出料到出料至少95%的搅拌物料；搅拌时间，从加料结束到出料开始；周期时间是指在连续生产条件下，从上一个投料工序开始到下一个投料工序开始的时间，即一个操作周期的总时间。

The working time of the mixer can be divided into: charging time, that is, from the start of charging to the mixing cylinder to the end of the charging process; Discharge time, at least 95% of the mixed materials from discharge to discharge; Mixing time, from the end of feeding to the beginning of discharging; Cycle time refers to the time from the previous feeding operation to the next feeding operation under continuous production conditions, that is, the total time of an operation cycle.

(1)搅拌机的出料系数：搅拌机每次（盘）可搅拌出的混凝土体积称为搅拌机的出料容量；每次可装入干料的体积称为进料容量，搅拌筒内部体积称为搅拌机的几何容量；为使搅拌筒内装料后仍有足够的搅拌空间，一般进料容量与几何容量的比值为0.22-0.40，称为搅拌筒的利用系数。出料容量与进料容量的比值称为出料系数，一般为0.60-0.70。在计算进料量时，可取出料系数0.65。

(1) Discharge coefficient of the mixer: the volume of concrete that can be mixed by the mixer each time (plate) is called the discharge capacity of the mixer; The volume of dry materials that can be loaded each time is called the feeding capacity, and the internal volume of the mixing drum is called the geometric capacity of the mixer; In order to keep enough mixing space after charging in the mixing drum, the ratio of feeding capacity to geometric capacity is generally 0.22-0.40, which is called the utilization coefficient of the mixing drum. The ratio of discharge capacity to feed capacity is called discharge coefficient, which is generally 0.60-0.70. When calculating the feeding amount, the discharging coefficient can be taken as 0.65.

（2)搅拌机的生产能力计算

(2) Calculation of production capacity of mixer

搅拌机的生产率

Production rate of mixer

Q

Q

按下式计算

Calculate according to the following formula

:

:

Q＝3.6VK/t1t2t3（m3/h）

Q＝3.6VK/t1t2t3（m3/h）

式中

Where

t1、t2、t3——分别为装料、搅拌、卸料时间（S）；

T1, t2, t3 - respectively the time of loading, mixing and unloading (S);

V——搅拌机出料容量；

V -- discharge capacity of mixer;

K——每循环工作时间的利用系数。

K -- utilization coefficient of working time of each cycle.

搅拌机的出料系数指的什么？以上就是问题的相关解答内容了，您对此有什么理解吗？可以关注我们网站随时联系我们http://www.zkhntjbj.com，做分享交流！

What is the discharge coefficient of the mixer? The above is the relevant answer to the question. Do you have any understanding? Follow our website and contact us at any time http://www.zkhntjbj.com , share and communicate!