由于设备本身的特性，自动上料搅拌机广泛用于各种建筑物。长期使用该设备不可避免地会引起各种故障问题。它们中的大多数已被阻塞，但是如果设备中出现此类问题，我们该怎么办？

Due to the characteristics of the equipment, automatic feeding mixers are widely used in various buildings. Long term use of the equipment will inevitably cause various failures. Most of them have been blocked, but what should we do if such problems occur in the device?

每次充电前，用水冲洗进水口，以在进水过程中保持进水口湿润。

Before each charging, flush the water inlet with water to keep the water inlet wet during the water inlet process.

在装载过程中，将装在车辆上的清洗水箱注满水。充电后，冲洗入口并清洁入口附近的混凝土。

During loading, fill the washing water tank installed on the vehicle with water. After charging, flush the inlet and clean the concrete near the inlet.

在施工现场卸货后，冲洗卸货箱，然后向混凝土储箱中添加30-40L的洗涤水。车辆回程期间，保持混凝土储罐缓慢旋转。

After unloading at the construction site, wash the unloading box, and then add 30-40L of washing water to the concrete storage box. Keep the concrete tank rotating slowly during vehicle return.

下次装载之前，请记住将混凝土储罐中的污水排干。

Before the next loading, please remember to drain the sewage from the concrete tank.

每天及时处理清洁混凝土储罐和机器周围的进口和出口。自动上料搅拌机的清洁点可防止水泥和混凝土结块。

Clean the inlets and outlets around the concrete tanks and machines in a timely manner every day. The cleaning point of automatic feeding mixer can prevent cement and concrete from caking.

另外，自动上料搅拌机在进行输送时如果有出现停工，大多是因为管道的堵塞引发的，但也存在非堵塞性的暂停工作，那么我们该怎么办？这时应该采取减慢输送的方式。利用罐内的残料进行慢速输送；在输送的过程中，要先找到中断的部位，停止输送；如果是夏天，中断时间不超过一小时。在使用自动上料搅拌机的过程中要注意时刻保持注意力集中，以免因为操作失误造成的机器损坏以及工期延误。

In addition, if the automatic feeding mixer shuts down during transportation, most of it is caused by the blockage of the pipeline, but there is also a non blocking suspension, what should we do? At this time, slow down the conveying. Use the residues in the tank for slow transportation; In the process of conveying, it is necessary to find the interrupted part and stop the conveying; If it is summer, the interruption time shall not exceed one hour. In the process of using the automatic feeding mixer, attention should be kept at all times to avoid machine damage and construction period delay caused by operational errors.

以上知识是关于自动上料搅拌机被阻塞时的处理步骤。在这里，小编需要提醒大家，他们需要做好设备维护和保养工作，以免设备使用失败。关注我们http://www.zkhntjbj.com，带您认识更多有关搅拌机的事项！

The above knowledge is about the handling steps when the automatic feeding mixer is blocked. Here, we need to remind everyone that they need to do a good job in equipment maintenance and repair to avoid equipment failure. Follow us http://www.zkhntjbj.com , let you know more about the mixer!