由于现在农村建设发展快，人们对混凝土搅拌机的需求不断增加，当然为了更好更的使用设备，就需要您对该设备的各个系统有所了解，下面小编就来为您分析一番。

Due to the rapid development of rural construction, people's demand for concrete mixers is increasing. Of course, in order to use the equipment better and more safely, you need to know about the various systems of the equipment. The following sections will analyze for you.

混凝土搅拌机的供水系统，一般由水泵，水泵驱动装置，水箱和量水器等组成，与一般搅拌机供水系统相仿。

The water supply system of concrete mixer is generally composed of water pump, water pump drive device, water tank and water gauge, which is similar to the water supply system of general mixer.

在这个供水系统中只设置一个能承受一定空气压力的蜜蜂水箱量水器和有关控制水阀。工作时，利用汽车的压缩空气经减压通入水箱，而将水箱储水从管道压出供清洗或搅拌混凝土使用。

In this water supply system, only one honeybee tank water gauge and relevant control water valve capable of withstanding a certain air pressure are set. When working, the compressed air of the vehicle is used to enter the water tank through decompression, and the water stored in the water tank is pressed out of the pipe for cleaning or mixing concrete.

供水系统的原理，是由密封压力水箱、闸阀、水表(量水器)和三通阀等组成。压力水箱下部接出水管，并通过阀门分别与水源或工作部分相通。

The principle of water supply system is composed of sealed pressure water tank, gate valve, water meter (water meter) and three-way valve. The outlet pipe is connected to the lower part of the pressure water tank and connected to the water source or working part through the valve.

水箱盖上装有排气阀和阀，以备进水排气和超压保护时起作用。另外还接有压缩空气进气管，压缩空气引自汽车的储气罐，经减压阀和控制阀供水箱排水。

The cover of the water tank is equipped with an exhaust valve and a safety valve for water inlet and exhaust and overpressure protection. In addition, it is also connected with a compressed air intake pipe. The compressed air is introduced from the air storage tank of the car, and is supplied to the water tank for drainage through the pressure reducing valve and control valve.

工作前先向水箱加满用水，工作时与水箱接通压缩空气，按需要调整三通阀，水既沿管路和阀门被送到冲洗管或搅拌筒中。

Fill the water tank with water before work, connect compressed air with the water tank during work, adjust the three-way valve as required, and the water is sent to the flushing pipe or mixing cylinder along the pipeline and valve.

气压供水系统加水量一般在水箱的四分之三处为宜；车辆在行驶时水路系统中各个阀门均应处于关闭状态，以免影响车辆的制动性能，或烧结摩擦片，从而影响车辆的制动性能。

The water volume of the pneumatic water supply system is generally three quarters of the water tank; All valves in the waterway system shall be closed when the vehicle is running, so as not to affect the braking performance of the vehicle, or sinter friction plates, thereby affecting the braking performance of the vehicle.

禁止随意焊接和改动水箱，避免重物撞击；经常检查阀体是否堵塞或是否有工作异常；在有结冰可能的环境中使用时，供水系统须排空存水，防止管路冻裂；经常检查系统的密封性，拆卸修理后，关键部位要涂螺纹密封胶。

It is prohibited to weld and change the water tank at will to avoid heavy object impact; Check the valve body frequently for blockage or abnormal operation; When the water supply system is used in an environment with the possibility of icing, the water storage must be drained to prevent the pipeline from freezing; Check the tightness of the system frequently. After disassembly and repair, apply thread sealant to key parts.

混凝土搅拌机的供水系统怎么好使用？这个问题的相关内容就在以上讲解完毕了，您有什么疑惑或者需求就来我们网站http://www.zkhntjbj.com咨询吧！

How to use the water supply system of concrete mixer? The relevant content of this question has been explained above. If you have any doubts or needs, please come to our website http://www.zkhntjbj.com Consult!