So, how to deal with concrete mixer rust method? Here is a brief answer:

一、在施工前应把焊渣、毛刺、铁锈、油污等铲除洁净，尤其是水泥罐。

1、 Before construction, welding slag, burr, rust, oil, etc. shall be removed and cleaned, especially the cement tank.

二、混凝土搅拌机钢架外表的处理可采用喷发或抛射除锈，手工和动力工具除锈。

2、 The surface of steel frame of concrete mixer can be treated by eruption or ejection, manual and power tools.

三、应该做到钢材外表应无可见的油脂和尘垢，而且没有附着不牢的氧化皮、铁锈和油漆涂层该外表应显露金属原貌，无再度锈蚀等。

3、 The steel surface should be free of visible grease and dust, and there should be no loose oxide skin, rust and paint coating. The surface should show the original appearance of the metal without re rusting.
             

四、已经处理的搅拌机外表，不得再次污染，当受到二次污染时，应再次进行外表处理， 经处理储罐底层，应及时涂刷底层涂料，问隔时刻不该超过五个小时，要求涂刷喷涂均匀无遗漏。目前，环氧树脂是市场上较为经济有效的防腐材料。

4、 The surface of the mixer that has been treated shall not be polluted again. When it is polluted again, the surface shall be treated again. After treatment, the bottom layer of the tank shall be painted in time. The interval time shall not exceed five hours, and the painting shall be uniform without omission. At present, epoxy resin is an economical and effective anti-corrosion material in the market.

综上所述，咱们了解了如何处理混凝土搅拌机生锈的办法，但也要注意的是，如果您是作为混凝土搅拌机检查人员一定要恪尽职守，常常排查一下自己所负责的搅拌机的问题，做到及时发现及时处理，避免形成不必要的费事。从细节到全体，从每一颗螺栓到一个水泥罐一部搅拌机，还有重要的搅拌机渠道支架都不要疏忽掉，只有保障搅拌机不存在任何潜在的问题，搅拌机方可生产。如想想要购置自动混凝土搅拌机，欢迎咨询我们的网站http://www.zkhntjbj.com了解详情。

To sum up, we know how to deal with the rusting of concrete mixer, but we should also pay attention to that if you are a concrete mixer inspector, you must do your duty, often check the problems of the mixer you are responsible for, so as to find out and deal with them in time, so as to avoid unnecessary trouble. From the details to the whole, from every bolt to a cement tank, a mixer, and the important mixer channel bracket, don't neglect. Only by ensuring that the mixer does not have any potential problems, the mixer can be safe in production. If you want to buy automatic concrete mixer, please consult our website http://www.zkhntjbj.com Learn more.