1： Operation operation

1、需进行搅拌的混合物应严格参照规定值，勿随意超过。

1. The mixture to be stirred shall strictly refer to the specified value and shall not exceed it at will.

2、传动装置、搅拌装置等内部件按照规定加足润滑油。

2. Add enough lubricating oil to internal parts such as transmission device and mixing device according to regulations.

3、使用前检查震动部件和与之连接部分是否紧固，接地线，各线路，供水装置等是否正常。

3. Before use, check whether the vibrating parts and their connecting parts are fastened, and whether the grounding wires, lines, water supply devices, etc. are normal.

4、检查搅拌叶片有无松动，非正常磨损。

4. Check the mixing blade for looseness and abnormal wear.

5、空转能否正常进行，电机，减速器等设备噪音是否异常。

5. Whether idling can be carried out normally, and whether the noise of motor, reducer and other equipment is abnormal.

6、搅拌机使用过程中加料顺序应合理科学促进搅拌物匀质，操作环境应保持清洁，卸料时供水应及时。

6. During the use of the mixer, the feeding sequence shall be reasonable and scientific to promote the uniformity of the mixture, the operating environment shall be kept clean, and the water supply shall be timely during unloading.

7、正确操作搅拌机，发现异常应立即停机。

7. Operate the mixer correctly and shut down immediately in case of any abnormality.

二：使用后的清洁

2： Cleaning after use

设备工作完毕，应认真清理机体内外，尤其是操作时尘土严重的环境。停机前，加入一定比例水石反复搅拌，清理内部余积。仔细冲洗机体外部附着物以及卸料门周围堆积物。

After the equipment is completed, carefully clean the inside and outside of the machine body, especially the dusty environment during operation. Before shutdown, add a certain proportion of water stone for repeated mixing to clean up the internal residue. Carefully wash the external attachments of the machine body and the deposits around the discharge door.

三：定期保养

3： Regular maintenance

1、为避免外加剂的投料管路堵塞，需定期清理。

1. In order to avoid the blockage of the feeding pipeline of the admixture, it needs to be cleaned regularly.

2、易损件定期检查，及时更换。

2. Vulnerable parts shall be inspected regularly and replaced in time.

3、为保证液压泵站正常运行工作，定期更换液压油。

3. In order to ensure the normal operation of the hydraulic pump station, the hydraulic oil shall be replaced regularly.

4、定期拆检清洗搅拌机件，检查磨损程度，影响设备使用的部件，应予更换。

4. Regularly disassemble, inspect and clean the mixer parts, check the wear degree, and replace the parts that affect the safe use of the equipment.

5、检查校正制动间隙，上料斗和卸料灵活情况和密闭性。

5. Check and correct the brake clearance, the flexibility and tightness of loading hopper and unloading.

6、检查搅拌叶片和传动装置灵活度。

6. Check the flexibility of mixing blades and transmission.

7、检查水路系统，电路情况。

7. Check the waterway system and circuit.

以上就是今天小编带给大家的精彩内容，混凝土搅拌机将不断深化自身的实力，不断的提高质量，做好价格公正，欢迎大家在网站上点击购买：http://www.zkhntjbj.com

The above is the wonderful content brought to you by today's Xiaobian. The concrete mixer will continue to deepen its own strength, continuously improve its quality and do a good job in price justice. You are welcome to click to buy on the website: http://www.zkhntjbj.com