混凝土搅拌机有各种各样的参数，每个参数都代表了各自不同的意义，很多时候我们选择混凝土搅拌机的时候参数都是重要的参考对象。以下小编为您收集整理的混凝土搅拌机参数的详解。

Concrete mixers have a variety of parameters, each of which represents its own different meaning. Many times, when we choose concrete mixers, parameters are important reference objects. The following is a detailed explanation of the concrete mixer parameters you have collected.

(1)额定容量

(1) Rated capacity

额定容量分为进料容量和出料容量。我国规定的泄流能力是表示力学模型的主要参数。给料能力(也称为装载量)是指装入搅拌筒的物料的单位体积，用l表示；卸料能力是指卸出的物料(混凝土等)。).体积单位用m表示。

The rated capacity is divided into feed capacity and discharge capacity. The discharge capacity specified in China is the main parameter of the mechanical model. Feeding capacity (also known as loading capacity) refers to the unit volume of materials loaded into the mixing drum, expressed in L; Unloading capacity refers to the discharged materials (concrete, etc.) The unit of volume is expressed in M.

(2)工作时间

(2) Working hours

搅拌机的工作时间可分为：装料时间，即从加料开始到搅拌筒，到装料过程结束；出料时间，从出料到出料少95%的搅拌物料；搅拌时间，从加料结束到出料开始；周期时间是指在连续生产条件下，从上一个投料工序开始到下一个投料工序开始的时间，即一个操作周期的总时间。

The working time of the mixer can be divided into: charging time, that is, from the beginning of charging to the mixing drum to the end of the charging process; Discharging time: at least 95% of the mixed materials from discharging to discharging; Mixing time, from the end of feeding to the beginning of discharging; Cycle time refers to the time from the start of the previous feeding operation to the start of the next feeding operation under continuous production conditions, that is, the total time of an operation cycle.

(3)搅拌速度

(3) Mixing speed

搅拌速度一般用n表示，单位为r/min拌筒旋转自落式混合机的n值一般为14---33r/min，常用的n值约为18r/min。带叶片的强制搅拌机的n值一般为20-38r/min，常用的n值为36-38r/min。

The mixing speed is generally expressed in N, and the unit is R / min. The n value of the drum rotating self falling mixer is generally 14-33 R / min, and the commonly used n value is about 18 R / min. The n value of forced mixer with blades is generally 20-38 R / min, and the commonly used n value is 36-38 R / min.

2.混凝土搅拌机生产率计算

2. Productivity calculation of concrete mixer

搅拌机的生产率取决于搅拌一罐混凝土所需的时间和每个罐的排出量。

The productivity of the mixer depends on the time required to mix one tank of concrete and the discharge volume of each tank.

3、混凝土搅拌机根据工程类型的选择

3. Selection of concrete mixer according to project type

(1)从工程量和工期方面

(1) In terms of quantities and construction period

当混凝土量大、工期长时，应选择中型或大型固定式混凝土搅拌机作为搅拌站。当混凝土量少、工期短时，应选用中小型移动式搅拌机。

When the concrete volume is large and the construction period is long, the medium-sized or large-sized fixed concrete mixer shall be selected as the mixing station. When the amount of concrete is small and the construction period is short, small and medium-sized mobile mixers shall be selected.

(2)从混凝土性能的设计

(2) From the design of concrete performance

当混凝土为塑性或半塑性时，应选用自落式搅拌机；当混凝土强度高、干燥或轻质时，应选用强制搅拌机。

When the concrete is plastic or semi plastic, the self falling mixer shall be selected; When the concrete is strong, dry or light, a forced mixer shall be selected.

(3)考虑混凝土的组成特点和稠度

(3) Considering the composition characteristics and consistency of concrete

当密度较小时，骨料粒径较大时，应选用大容量的自落式搅拌机；当稠度较大，骨料粒径较大时，应选择搅拌筒速度较快的自落式搅拌机；如果稠度较大，骨料粒径较小，应选择中、小容量的强制式搅拌机或锥形反卸式搅拌机。

When the density is small and the aggregate size is large, a large capacity self falling mixer shall be selected; When the consistency is large and the aggregate particle size is large, the self falling mixer with high mixing drum speed shall be selected; If the consistency is large and the aggregate particle size is small, the medium and small capacity forced mixer or conical reverse dump mixer shall be selected.

混凝土搅拌机主要的参数详解讲解完毕了，希望能够给您使用中的帮助，当然您在选购该搅拌机的时候也可以作为参考信息使用，更多内容来我们网站http://www.zkhntjbj.com咨询！

The main parameters of the concrete mixer have been explained in detail. I hope I can help you in using it. Of course, you can also use it as reference information when purchasing the mixer. For more information, please visit our website http://www.zkhntjbj.com consulting service