搅拌一体机的漆面时间久了不处理会造成车不同程度的氧化、损坏，因此保养非常重要。有哪些漆面是需要我们保养呢？下面我们一起来看一下。

The paint surface of the mixer will be oxidized and damaged to different degrees if it is not treated for a long time, so maintenance is very important. Which paint surfaces need our maintenance? Now let's take a look.

1、漆面氧化。搅拌一体机在太阳紫外线的照射下，漆膜会不断向空气中蒸发油份以达到保护自身的作用，长时间就会导致漆面油分的过分散失。漆面的亮度、深度都大打折扣，使漆面慢慢发白，形成氧化层，缩短了车漆的寿命，肉眼就可观察到车漆发乌、发白、无光泽等现象。氧化严重的话可以通过研磨和抛光来处理。

1. Paint oxidation. Under the sun's ultraviolet radiation, the paint film will continuously evaporate oil into the air to protect itself, which will lead to excessive loss of paint over a long period of time. The brightness and depth of the paint are greatly reduced, so that the paint slowly turns white, forming an oxide layer, shortening the life of the car paint. It can be observed with the naked eye that the car paint turns black, white, and lusterless. If the oxidation is serious, it can be treated by grinding and polishing.

2、交通膜。搅拌一体机在行驶过程中由于摩擦而产生强烈的静电层，静电对灰尘、油污和化学粉尘吸附能力很强，时间长了会形成一层坚硬的交通膜，这种“交通膜”易使漆面发生氧化腐蚀，这种情况可采用研磨抛光处理

2. Traffic film. During the driving process, the mixer generates a strong electrostatic layer due to friction. Static electricity has a strong adsorption capacity on dust, oil and chemical dust. Over time, a hard traffic film will be formed. This "traffic film" is easy to cause oxidation and corrosion of the paint surface. In this case, grinding and polishing can be used

3、龟裂。如果平时不对漆面作护理，金属漆可能产生一种非常细微的裂痕，它会不断地渗透车漆，直穿透整个色漆层，这种现象就叫“龟裂”。有时因为重喷漆质量的问题，也会产生龟裂。如果裂纹中有车蜡，会发现车身有条纹状的龟裂现象。经常打蜡可逐渐减少龟裂的产生。

3. Cracking. If the paint surface is not cared for at ordinary times, the metal paint may produce a very fine crack, which will continuously penetrate the car paint until it penetrates the entire paint layer. This phenomenon is called "cracking". Sometimes cracks may occur due to the quality problem of re painting. If there is car wax in the crack, it will be found that the body has striped cracks. Frequent waxing can gradually reduce cracking.

4、褪色。大气中的油烟和污染物是造成车漆变色、褪色的主要原因。褪色与氧化不同，发生褪色时，车漆会出现不均匀的色差。中、轻度的褪色可用研磨、抛光治理，严重时须重新喷漆。

4. Fade. The soot and pollutants in the atmosphere are the main causes of discoloration and fading of car paint. Fading is different from oxidation. When fading occurs, the car paint will have uneven color difference. Moderate and mild discoloration can be treated by grinding and polishing, and re painting is required in case of severe discoloration.

5、蚀痕。蚀痕是面状磨蚀。昆虫、鸟粪、树汁、焦油、沥青都有可能引起的蚀痕。轻微的蚀痕可用研磨抛光。

5. Etch marks. Erosion marks are surface abrasion. Insects, bird droppings, tree sap, tar and asphalt may cause erosion marks. Minor corrosion marks can be solved by grinding and polishing.

6、水痕纹。水痕纹是水滴蒸发后留下的痕迹，呈环状。氧化、常用洗涤灵清洗的车容易染上水痕。轻微水痕纹的通过打蜡抛光可，严重时需研磨或喷漆。

6. Water marks. The water mark is the mark left by the evaporation of water drops, which is circular. Vehicles that are oxidized and washed with detergent are easy to get water marks. Slight water marks can be cured by waxing and polishing, and serious water marks need to be grinded or painted.

7、浅划痕。由于摩擦及日常护理不当，搅拌一体机车漆面出现轻微的划痕，但并未露出底漆，这种划痕在阳光下比较明显。一般采用的抛光方法去除。

7. Light scratches. Due to improper friction and daily care, the paint surface of the mixing integrated locomotive has a slight scratch, but the primer is not exposed, which is obvious in the sun. It is generally removed by professional polishing method.

搅拌一体机漆面保养的具体内容讲解完毕，如果您对此有什么想了解的地方或者有什么需求就来我们网站http://www.zkhntjbj.com咨询吧。

After explaining the specific content of the paint maintenance of the mixing machine, if you have anything to know or need, please come to our website http://www.zkhntjbj.com Consult.