欢迎您访问莱州聚峰机械有限公司网站!
点击拨打服务热线:400-879-1999
大家都在搜: 铲斗外翻 3.5吨A后侧 3.5吨A后尾

怎样应对清理搅拌机模具残留杂质?

来源:http://www.zkhntjbj.com/日期:2020-11-26

概述:  搅拌机是一种大型机械设备,在使用过程中需要根据操作条件进行操作。 但是,设备运行的频率越高,发现故障的次数就越多。 在操作过程
  搅拌机是一种大型机械设备,在使用过程中需要根据操作条件进行操作。 但是,设备运行的频率越高,发现故障的次数就越多。 在操作过程中,还会经常在整个生产线上产生残留的杂质,例如模具上的残留杂质,而砂浆中的杂质则是更常见的杂质。
  Mixer is a kind of large-scale mechanical equipment, which needs to be operated according to the operating conditions in the process of use. However, the higher the frequency of equipment operation, the more times of fault detection. In the process of operation, there are often residual impurities in the whole production line, such as the residual impurities on the mold, and the impurities in the mortar are more common impurities.
  模具残留在模具上; 模具上的残留材料是直接粘附在毛坯表面的较大颗粒,因此在切割过程中可能会损坏或直接损坏线材。 在电线上。 这样,毛坯也可能导致未对准和规格偏差。 在严重的情况下,可能会断开连接,从而导致事故。
  The die remains on the die; the residual material on the die is the larger particles directly adhering to the surface of the blank, so the wire may be damaged or directly damaged during the cutting process. It's on the wire. In this way, the blank may also lead to misalignment and specification deviation. In severe cases, the connection may be disconnected, resulting in accidents.
  砂浆中的杂质; 在使用搅拌机产生的废浆时可能会产生杂质。 可能含有杂质。 当它进入泥浆罐时,将被放置未经处理或其他一些杂质。 毛坯会影响杂质,并且在切割过程中造成的损坏相对较大。 会严重影响产品质量。
  Impurities in mortar; impurities may be produced when using waste slurry produced by mixer. It may contain impurities. When it enters the mud tank, it will be placed untreated or some other impurities. The blank will affect the impurities, and the damage caused in the cutting process is relatively large. It will seriously affect the product quality.
             混凝土搅拌机
  在搅拌机的操作中,经常会遇到模具中残留的杂质和砂浆中的杂质。 为了有效避免残留杂质和各种产物的影响,在浇注砂浆的同时可以进行严格的过滤,并且需要严格按照生产工艺及时清洗胚体,以确保生产质量。
  In the operation of the mixer, the impurities in the mould and mortar are often encountered. In order to effectively avoid the influence of residual impurities and various products, strict filtration can be carried out while pouring mortar, and the embryo body needs to be cleaned in time strictly according to the production process to ensure the production quality.
  打开搅拌机的功能时,如果管道堵塞在清洁管道中,则将抽水方式与清洁球结合在一起以清洁管道。 冬季清洗混凝土搅拌泵后,应将积聚的水排干,以免损坏水泵,水箱和水管。 清洁混凝土搅拌泵时,如果有必要进入搅拌桶,则除了要切断电源并取下保险丝外,开关盒也要锁紧。 清洁前,准备一些石头,洗球,水和凿子。
  When the mixer is turned on, if the pipe is blocked in the cleaning pipe, the pumping method is combined with the cleaning ball to clean the pipe. After cleaning the concrete mixing pump in winter, the accumulated water should be drained to avoid damaging the water pump, water tank and water pipe. When cleaning the concrete mixing pump, if it is necessary to enter the mixing tank, in addition to cutting off the power supply and removing the fuse, the switch box should also be locked. Before cleaning, prepare some stones, washing balls, water and chisel.
  外部线圈和滤波器是搅拌机中的组件,可与其他组件配合使用,以确保其他组件提供它们在搅拌机运行中应做的工作。 让我们看一下过滤器的用法。 在生产过程中,主要对机械生产线中产生的杂质和杂质进行过滤,以确保液压油的纯度和使用时间,并确保搅拌机的内部机械设备,顺利生产地垫。、
  External coils and filters are components in the mixer and can be used in conjunction with other components to ensure that other components provide the work they should do during the mixer operation. Let's first look at the use of filters. In the production process, the impurities and impurities produced in the mechanical production line are mainly filtered to ensure the purity and service time of the hydraulic oil, and ensure the internal mechanical equipment of the mixer to produce the floor mat smoothly. ,
  以上就是关于怎样应对清理搅拌机残留杂质的方法,感谢您的阅读,希望对您有所帮助!
  The above is about how to deal with the cleaning mixer residual impurities, thank you for reading, hope to help you!

截屏,微信识别二维码