The shaft mixer is a device for spraying, humidifying and stirring conveying powdery materials by using a pair of helix axes with stirring blades. It can be used to stir and crush clay materials in ceramic industry; Fly ash, aggregate, admixture and other raw materials shall be evenly mixed. The equipment has the advantages of high mixing efficiency, compact structure, stable operation, cleanness and environmental protection. It is used in chemical, mining, ceramsite and other industries to humidify, stir and transport solid granular materials or powder materials.

双轴混合机的突出优点如下:

The outstanding advantages of double shaft mixer are as follows:

1、整个搅拌、输送过程在密封空间内进行，无粉尘泄漏，清洁;

1. The whole mixing and conveying process is carried out in a sealed space, without dust leakage, clean and environmental protection;

2、是混合、加湿、输送相结合，均匀性好，生产效率高，产能大;

2. It is a combination of mixing, humidification and transportation, with good uniformity, high production efficiency and large production capacity;

3、轴端采用迷宫式和填料式组合密封，起到双重密封作用，密封效果好;

3. The shaft end adopts labyrinth and packing combined seal, which plays a double sealing role and has good sealing effect;

4、搅拌叶片采用耐磨材料制成，经过特殊表面处理后具有较高的耐磨性;

4. The mixing blade is made of wear-resistant material, which has high wear resistance after special surface treatment;

5、整机结构紧凑，空间小，传动平稳，可靠性高，噪音低。

5. The whole machine has the advantages of compact structure, small space, stable transmission, high reliability and low noise.

双轴混合器的主要结构如下图所示，主要包括驱动装置、进料口螺杆叶片轴、罐体、出料口等部件。驱动装置由电机联轴器、减速机、齿轮副组成。电机通过联轴器带动减速机，再带动齿轮副运行，实现两个斜叶片轴的相移。螺旋叶片安装在螺旋叶片轴上，螺旋叶片由耐磨材料制成。物料通过进料口进入罐内，由螺旋叶片搅拌破碎。物料粒度均匀后从出料口出料。

The main structure of the double shaft mixer is shown in the figure below, mainly including driving device, feed port screw blade shaft, tank body, discharge port and other components. The driving device is composed of motor coupling, reducer and gear pair. The motor drives the reducer through the coupling, and then drives the gear pair to realize the phase shift of the two inclined blade shafts. The spiral blade is installed on the spiral blade shaft, and the spiral blade is made of wear-resistant material. The materials enter the tank through the feed inlet and are stirred and broken by spiral blades. After the particle size of the material is uniform, the material is discharged from the discharge port.

我们一直在坚持分享的路上自动上料搅拌机http://www.zkhntjbj.com真正为您您所需要的问题.

We have been insisting on the automatic feeding mixer on the way of sharing http://www.zkhntjbj.com Truly solve the problems you need