搅拌一体机与搅拌机温控系统配套的搅拌机温控系统用夹套环绕搅拌机，并设有与蒸汽发生设备连接的蒸汽调节阀和与冷却水连接的冷却水调节阀。

The mixer temperature control system matched with the mixer temperature control system of the all-in-one mixer surrounds the mixer with a jacket, and is equipped with a steam regulating valve connected with the steam generation equipment and a cooling water regulating valve connected with the cooling water.

搅拌机和夹套内的实时温度由搅拌机温控系统测量，温控设备采用控温方式控制夹套内的温度，进而完成搪玻璃搅拌机内的温度控制;

The real-time temperature in the mixer and jacket is measured by the mixer temperature control system, and the temperature control equipment uses the temperature control method to control the temperature in the jacket, so as to complete the temperature control in the glass lined mixer;

当搅拌机温控系统温度低于设定值时，打开蒸汽调节阀，提高夹套内水温和搅拌机内物料温度；

When the temperature of the mixer temperature control system is lower than the set value, open the steam regulating valve to increase the water temperature in the jacket and the material temperature in the mixer;

搅拌一体机当测温装置测得的温度高于设定值时，打开冷却水调节阀，冷却夹套内水温，降低搅拌机内物料温度，然后将搅拌机内温度稳定在一定的温度方案，使反应顺利进行；

When the temperature measured by the temperature measuring device of the integrated mixer is higher than the set value, open the cooling water regulating valve to cool the water temperature in the jacket, reduce the material temperature in the mixer, and then stabilize the temperature in the mixer at a certain temperature scheme to make the reaction proceed smoothly;

与控温系统配套的搅拌机一般安装在玻璃搅拌器上，也可以安装在桨式或叶轮式搅拌器上；

The mixer matched with the temperature control system is generally installed on the glass mixer, and can also be installed on the paddle type or impeller type mixer;

用户在使用搅拌机温控系统后，一定要知道不同厂家的搅拌机温控系统的特点和性能也是不同的，所以了解搅拌机温控系统的特点是很有必要的。

After using the mixer temperature control system, users must know that the characteristics and performance of mixer temperature control systems from different manufacturers are also different, so it is necessary to understand the characteristics of mixer temperature control system.

此外搅拌器轴和叶片不能在弯曲或变形的情况下运行。如果轴弯曲或刀片变形，请立即停机进行处理或更换。搅拌系统运行过程中，严禁杂物进入反应池，以免损坏搅拌轴和叶片。

In addition, the agitator shaft and blades shall not operate under bending or deformation. If the shaft is bent or the blade is deformed, stop the machine immediately for treatment or replacement. During the operation of the mixing system, sundries are strictly prohibited from entering the reaction tank to avoid damaging the mixing shaft and blades.

如果人们需要进入反应罐进行清洁或维护，必须切断电机电源，并悬挂“禁止关闭”的警告标志。在手动清洗和维护反应罐时，必须有专人在反应罐外进行监督。

If people need to enter the reaction tank for cleaning or maintenance, they must cut off the power supply of the motor and hang a warning sign of "no shutdown". When manually cleaning and maintaining the reaction tank, special personnel must be assigned to supervise outside the reaction tank.

搅拌一体机搅拌系统运行一段时间后，如果反应罐底部有沉淀物、杂质和杂物，应及时停止，用清水冲洗或人工清理，以确保搅拌器的运行。

After the mixing system of the all-in-one mixer operates for a period of time, if there is sediment, impurities and sundries at the bottom of the reaction tank, it shall be stopped in time, washed with clean water or manually cleaned to ensure the safe operation of the mixer.

以上就是今天为大家分享的关于问题的相关内容，希望对大家能有所帮助，想要了解更多内容可以电话联系我们或者关注我们的网站http://www.zkhntjbj.com。

The above is the relevant content about the problem shared for you today. I hope it can help you. If you want to know more, you can contact us by phone or follow our website http://www.zkhntjbj.com 。