搅拌一体机在使用过程中的6点注意
来源:http://www.zkhntjbj.com/日期:2022-11-09
对于经常需要使用
搅拌一体机的企业来说,使用的搅拌一体机和搅拌一体机配件的工作效率和性能会直接影响到整个生产过程,因此对于搅拌一体机设备的了解显得十分的重要,关注搅拌一体机设备的也是一项重要的内容。
For enterprises that often need to use the mixing machine, the working efficiency and performance of the mixing machine and its accessories will directly affect the entire production process. Therefore, it is very important to understand the mixing machine, and it is also important to pay attention to the safety of the mixing machine.
1、搅拌一体机及搅拌一体机配件的安装要牢固,尽量选择较平整的地段,保证行走轮要离开地面,而且机座还要高于地面,这是保证机器正常工作的重要前提。
1. The mixing machine and its accessories shall be firmly installed, and a relatively flat section shall be selected as far as possible to ensure that the walking wheel is off the ground and the base is higher than the ground, which is an important prerequisite for ensuring the normal operation of the machine.
2、搅拌一体机开始工作前要行空转,确定能够正常工作后再加入搅拌物料。
2. Before the mixing machine starts to work, it should be idling first, and then add mixed materials after confirming that it can work normally.
3、在搅拌过程中要保证在加料的过程中慢慢加水,这是保证搅拌质量的关键步骤。(投放的搅拌物料禁止超过额定质量)
3. During the mixing process, it is necessary to ensure that water is added slowly during the feeding process, which is a key step to ensure the mixing quality. (It is forbidden to put mixing materials beyond the rated quality)
4、在加料的过程中,搅拌一体机禁止用各种工具去触碰机器,更严禁用工具伸入搅拌筒内将物料扒出。
4. In the process of feeding, it is forbidden to touch the machine with various tools, and it is more strictly prohibited to stretch tools into the mixing drum to pull out materials.
5、在搅拌筒以及料斗内的杂物时,须要将机器的电源切断,保证在停机的状态下继续进行工作。
5. When removing the sundries in the mixing drum and hopper, it is necessary to cut off the power supply of the machine to ensure that the work can continue under the shutdown state.
![搅拌一体机](http://www.zkhntjbj.com/uploadfile/2022/1109/20221109052113487.png)
6、在选择搅拌一体机工作零件(如轴承、托辊皮带、搅拌一体机配件等)时,尽量不要一味寻求便宜,多方面比较,争取选择性价比较高的产品。
6. When selecting the working parts of the mixing machine (such as bearings, idler belts, parts of the mixing machine, etc.), try not to look for cheap and compare them in many ways, and try to choose products with high cost performance.
在搅拌一体机出现故障时,严禁强制运行搅拌一体机器,不但会严重缩短机器的使用寿命,还容易引起各种意外事故,正确的做法为立即切断机器电源,仔细检查,排除事故发生的原因,再对症下药。
In case of failure of the mixing machine, it is strictly prohibited to operate the mixing machine forcibly, which will not only seriously shorten the service life of the machine, but also easily cause various accidents. The correct way is to immediately cut off the power supply of the machine, carefully check, eliminate the cause of the accident, and then apply medicine to the symptoms.
For the all-in-one mixing machine, the potential safety problems brought by the all-in-one mixing machine in the production process can have large or small consequences. Only when they cause enough problems can these problems be eliminated. Come to our website if you have any related questions http://www.zkhntjbj.com Find out!