2方后置驾驶室搅拌机
来源：http://www.zkhntjbj.com/日期：2020-04-26
概述：2方后置驾驶室自上料搅拌机选购技巧：2-party rear cab self loading mixer selection skills:1、按照工艺条件、搅拌目的和要求，选
2方后置驾驶室自上料搅拌机选购技巧：
2-party rear cab self loading mixer selection skills:
1、按照工艺条件、搅拌目的和要求，选择搅拌器类型，选择搅拌器类型时应该充分了解搅拌器的动力特征和其在搅拌过程中所产生的流动状态与各种搅拌的关系。
1. According to the process conditions, mixing purpose and requirements, the type of agitator should be selected. When selecting the type of agitator, we should fully understand the dynamic characteristics of the agitator and the relationship between the flow state and various kinds of mixing.
2、按照电动机功率、搅拌转速和工艺环境，从减速机选型中选择减速机机型。如果按照实际工作来选择减速机，则实际工作扭矩应该小于减速机可用的扭矩。
2. According to the motor power, mixing speed and process environment, the reducer type is selected from the reducer selection. If the reducer is selected according to the actual work, the actual working torque should be less than the available torque of the reducer.
3、按照机架的公称心寸DN、搅拌轴的搁轴型式及压力等级、选择安装底盖、凸缘底座或凸缘法兰。
3. According to the nominal size DN of the frame, the type and pressure rating of the mixing shaft, the bottom cover, flange base or flange should be installed.
4、按照所确定的搅拌器型式及搅拌器在搅拌过程中所产生的流动状态，工艺对搅拌混合时间、沉降速度、分散度的控制要求，通过实验手段和计算机模拟设计，确定电动机功率、搅拌速度、搅拌器直径。
4. According to the determined type of agitator, the flow state of agitator in the process of mixing, and the control requirements of process on mixing time, sedimentation speed and dispersion, the motor power, mixing speed and agitator diameter are determined by experimental means and computer simulation design.
5、按照支承和抗振条件，确定是否配置辅助支承。
5. According to the support and anti vibration conditions, determine whether to configure auxiliary support.
全国服务热线
点击拨打服务热线：400-879-1999
