混凝土搅拌机的十大结构系统体系构成
来源：http://www.zkhntjbj.com/日期：2022-05-30
混凝土搅拌机由很多部分组成，大致可分为十个系统：底盘系统、液压传动系统、搅拌罐、卸料系统、清洗系统、副车架、操作系统、托轮系统、上料系统、电路系统由十部分组成。下面小编就给大家详细介绍一下。
The concrete mixer consists of many parts, which can be roughly divided into ten systems: chassis system, hydraulic transmission system, mixing tank, unloading system, cleaning system, subframe, operating system, supporting wheel system, feeding system and circuit system. Let's give you a detailed introduction.
1、底盘系统：混凝土搅拌机的主要部件，整个混凝土搅拌机的运输由现场实现。
1. Chassis system: the main part of the concrete mixer. The transportation of the whole concrete mixer is realized on site.
2、托辊系统：搅拌罐后部与副车架连接的部分，主要起到支撑筒体的作用。
2. Idler system: the part connecting the rear part of the mixing tank with the subframe, which mainly plays the role of supporting the cylinder.
3、搅拌罐体：搅拌筒是整个混凝土搅拌机的关键部件，是储存混凝土的容器，对防止混凝土凝固和离析起着决定性的作用。管体内有叶片，主要起搅拌和引导物料的作用。
3. Mixing tank body: the mixing tank is the key component of the whole concrete mixer and the container for storing concrete, which plays a decisive role in preventing concrete solidification and segregation. There are blades in the tube, which are mainly used to stir and guide materials.
4、卸料系统：主要由主卸料槽、副卸料槽、锁杆等组成，副卸料槽起到延长主卸料槽的作用。
4. Discharge system: it is mainly composed of main discharge chute, auxiliary discharge chute, locking rod, etc. the auxiliary discharge chute plays the role of extending the main discharge chute.
5、电路系统：主要是指整个电路，包括车辆的尾灯、侧示廓灯、廊灯、冷却风扇电机等。
5. Circuit system: mainly refers to the whole circuit, including the tail lamp, side clearance lamp, corridor lamp, cooling fan motor, etc.
6、副车架：混凝土搅拌机的副车架是主要的承重部件，运行时的载荷几乎全部通过它支撑并传递到底盘上。混凝土搅拌机的副车架还起到减轻路面颠簸和减速造成的冲击载荷的作用。
6. Subframe: the subframe of the concrete mixer is the main load-bearing component, and almost all the load during operation is supported by it and transmitted to the chassis. The subframe of the concrete mixer also reduces the impact load caused by road bumps and deceleration.
7、操作系统：
混凝土搅拌机的操作系统由控制器、联动轴、软轴和连杆机构组成，主要控制搅拌筒的转速和转动方向。
7. Operating system: the operating system of the concrete mixer is composed of a controller, a linkage shaft, a flexible shaft and a connecting rod mechanism, which mainly controls the speed and direction of rotation of the mixing drum.
8、液压传动系统：取力器取出的发动机动力转换成液压能（排量和压力），再由电动机输出成机械能（转速和扭矩），为汽车的转动提供动力。搅拌筒。
8. Hydraulic transmission system: the engine power taken out by the power takeoff is converted into hydraulic energy (displacement and pressure), and then output into mechanical energy (speed and torque) by the motor to provide power for the rotation of the vehicle. Mixing drum.
9、进料系统：主要由进料斗和支架组成。进料斗因冲击磨损大，物料要求耐磨性好。支架主要起到减小冲击力的作用。
9. Feeding system: mainly composed of feeding hopper and support. The feed hopper is subject to great impact wear, and the materials are required to have good wear resistance. The support is mainly used to reduce the impact force.
10、清洗系统：清洗系统主要由压力水箱、水枪、水管、阀门等组成，采用气压供水，主要作用是装料后冲洗料斗，冲洗搅拌筒和卸料后的卸料槽，防止混凝土粘连。
10. Cleaning system: the cleaning system is mainly composed of pressure water tank, water gun, water pipe, valve, etc. it uses pneumatic water supply. Its main function is to wash the hopper after loading, the mixing drum and the discharge tank after unloading, so as to prevent concrete adhesion.
That's all for the ten structural systems of concrete mixer. You can follow our website www.zkhntjbj COM, see more information about this device!
全国服务热线
点击拨打服务热线：400-879-1999
