搅拌一体机发生堵塞问题如何处理？
来源：http://www.zkhntjbj.com/日期：2021-01-26
概述：搅拌一体机堵塞的处理方法如下：The treatment methods for the blockage of the mixer are as follows:1 每次充电前用水冲洗
搅拌一体机堵塞的处理方法如下：
The treatment methods for the blockage of the mixer are as follows:
1. 每次充电前用水冲洗进料口，以便在充电过程中保持进料口潮湿。
1. Flush the inlet with water before each charging to keep the inlet moist during charging.
2. 搅拌机在装载的同时用水填充车辆附带的洗涤水箱。
2. The mixer fills the washing water tank attached to the vehicle with water while loading.
3. 搅拌机充电后冲洗进料口并清洗进料口附近的混凝土。
3. After the mixer is charged, flush the inlet and clean the concrete near the inlet.
4. 在施工现场卸货后，冲洗卸料槽，然后在混凝土储罐中加入30-40L清洗水;在车辆返回行程期间，保持混凝土储罐缓慢旋转。
4. After unloading at the construction site, flush the discharge tank, and then add 30-40l cleaning water into the concrete storage tank; during the vehicle return journey, keep the concrete storage tank rotating slowly.
5. 搅拌一体机装货前，请记得将混凝土储罐中的污水排出。
5. Please remember to discharge the sewage from the concrete storage tank before loading the mixer.
6. 每天彻底清洁混凝土储罐和机器周围的进出口。自动进料混合器的清洁点确保没有水泥和混凝土结块。
6. Clean the inlet and outlet around the concrete storage tank and machine thoroughly every day. The cleaning point of the automatic feed mixer ensures that there is no cement and concrete caking.
The above is the introduction of how to deal with the blockage problem of all-in-one mixer. I believe you all know about it. For more wonderful information, please click our website: http://www.zkhntjbj.com
全国服务热线
点击拨打服务热线：400-879-1999
