We may encounter scratches and bumps during the driving of the vehicle, which may cause the paint to fall off. Today, we will talk about whether the paint of the automatic feeding mixer needs to be protected.

1、尽量把搅拌机停放在车库里，停车的时候不要有强阳光暴晒，减少雨淋。

1. Park the mixer in the garage as far as possible, and do not have strong sunlight when parking, so as to reduce the rain.

2、外出停车的时候不要乱停乱放，如果挡路碍事会招人划车漆。

2. Don't park and leave when you go out. If you get in the way, you will draw paint.

3、搅拌机刚买回来的时候要封一次釉，以后少抛光多打蜡。

3. When the blender is just bought back, the glaze should be sealed once. In the future, it should be polished less and waxed more.

4、擦搅拌机不要干擦，上面的小沙粒可能会磨损漆面，一定要水冲洗。

4. Do not dry wipe the mixer, the small sand on the top may wear the paint surface, so it must be washed with water.
                

自动上料搅拌机的动力由二类底盘全功率取力器输出通过传动轴把动力传给液压泵，液压泵产生液压能通过油管传到液压马达，液压马达把液压能转化为动能并通过减速机减速增扭传递到搅拌罐，通过调节（双作用变量）液压泵的伺服手柄角度达到调节搅拌罐正反转和转速的大小，以及完成砼装料、搅拌、搅动、出料等作业的目的。

The power of the automatic charging mixer is output by the second type chassis full power take-off, and the power is transmitted to the hydraulic pump through the transmission shaft. The hydraulic energy generated by the hydraulic pump is transmitted to the hydraulic motor through the oil pipe. The hydraulic motor converts the hydraulic energy into kinetic energy and transmits it to the mixing tank by reducing the speed and increasing the torque of the reducer. The positive and negative of the mixing tank can be adjusted by adjusting the servo handle angle of the hydraulic pump (double acting variable) The size of rotation and rotation speed, and the purpose of completing concrete loading, mixing, stirring, discharging and other operations.

以上是关于自动上料搅拌机的车漆保护的方法吗，希望对大家有所帮助，如您想了解更多资讯内容请点击官网：www.zkhntjbj.com。

The above is about the paint protection method of automatic feeding mixer, hope to help you. If you want to know more, please click the official website: www.zkhntjbj.com 。